1. Setup & Power Connection

• Remove the projector from its packaging.
• Use the provided USB power cable to connect the projector to a power source (USB adapter, laptop, or power bank).

2. Powering On

• Press the power button on the projector to turn it on.
• If you have the remote control, use the green "ON" button to activate the projector.

3. Selecting Light Colors & Effects

Use the remote control to customize your experience:

• Activate or deactivate individual LEDs with color-specific buttons (Green, Red, Blue, and White).
• Adjust brightness using the Brightness +/- buttons.
• Switch between light effects by rotating effects clockwise or counterclockwise.

4. Adjusting Motor Speed

• Control the speed of the aurora light movements with the Motor Speed +/- buttons.
• You can slow the effect for a calming atmosphere or speed it up for a more dynamic experience.

5. Setting a Timer

• Save energy by setting an automatic shut-off timer:

6. Mode Saving

• Use the "Mode Saving" button to save your favorite light mode and settings for future use.

7. Placement for Best Effects

• Place the projector on a stable, flat surface.
• Aim the projection lens toward a ceiling or large wall for the full aurora display.
• Ensure the room is dark for maximum effect visibility.

8. Power Off

• Turn off the projector by pressing the red "OFF" button on the remote or the projector’s built-in power button.